CNC • DRIVE • MOTION
FANUC option references, troubleshooting notes and repair records. Check the applicable model and software version before using any procedure.
FANUC OPTION
Understand option functions, file backups and certification messages through documented model and version boundaries.
Independent support for controls, drives and motors. Provide the exact equipment model and fault information when contacting us.
Using the 0i-D machining-center manual, calculations around a nonzero scaling center and an internal circular contour distinguish workpiece geometry, tool compensation and peck depth. Enlarging dimensions does not mean multiplying every value by two.
Read article →The 0i-D machining-center manual explains how 11600#5 AX1 handles omitted axes after rotation. An original 90-degree example compares endpoints for a Y-only command and an explicit XY command.
Read article →Using the 0i-F descriptions manual, point coordinates and signed triangle area explain single- and dual-axis mirroring. Geometric reflection, arc-direction handling and physical spindle rotation remain distinct to avoid reversing the program twice.
Read article →Using the 0i-D machining-center manual, calculations around a nonzero scaling center and an internal circular contour distinguish workpiece geometry, tool compensation and peck depth. Enlarging dimensions does not mean multiplying every value by two.
Read article →The 0i-D machining-center manual explains how 11600#5 AX1 handles omitted axes after rotation. An original 90-degree example compares endpoints for a Y-only command and an explicit XY command.
Read article →Using the 0i-F descriptions manual, point coordinates and signed triangle area explain single- and dual-axis mirroring. Geometric reflection, arc-direction handling and physical spindle rotation remain distinct to avoid reversing the program twice.
Read article →The cutter compensation C chapter of the 16i/18i-MB manual distinguishes geometric inaccessibility, compensation data and path-reversal checks. An internal-fillet example explains why reducing the offset value is not a valid way to clear an alarm.
Read article →A motion-free variable trace based on the 0i-D common operator’s manual compares G65 with M98. It explains argument A mapping to #1, restoration of local-variable levels, and why common variables are not isolated by those levels.
Read article →For a G01 linear model on a 0i-F machining center, inverse-time feed formulas calculate time and speed before and after segmentation. The article distinguishes G93 F from feed per minute and recalculates F to preserve ideal speed.
Read article →The 0i-D manual distinguishes the cylinder radius, rotary-axis angle and developed-surface arc radius in G07.1. An arc-length calculation explains dimensional errors, followed by key restrictions on mode transitions.
Read article →The original 15i/150i-MB manual distinguishes circular tangential feed from spatial-path feed. Calculations for the same hypothetical geometry show the two velocity components and why HTG semantics must be checked.
Read article →The 30i/31i/32i-B descriptions manual distinguishes life-management groups, physical tools and offset data. A remaining-life calculation separates advance warning from end of life and helps investigate dimensional changes after a replacement tool takes over.
Read article →The FANUC function catalog distinguishes built-in CNC checking from a PC/FOCAS2 implementation. The article identifies validation priorities for geometry, tool data and communications, including the impact of fixture changes.
Read article →Coordinate calculations for a four-station fixture distinguish origin translation, workpiece orientation and program selection errors. The Plus catalog defines the scope of the 48 additional coordinate systems. These are geometric checks, not a machine-ready program.
Read article →Signal paths and delay-distance calculations explain High-Speed Skip, distinguish it from Continuous High-Speed Skip, and provide a layered approach to validating measurement errors.
Read article →The 0i-D machining-center manual explains tapping synchronization and feed semantics. Calculations relate thread lead to the two feed modes, with boundaries for overrides, rigid-mode entry and interruption recovery.
Read article →The 0i-TF manual explains speed constraints near the center during polar coordinate interpolation. Calculations illustrate their scale, alongside restrictions on G12.1/G13.1, compensation state and coordinate-system changes.
Read article →Which repetitive machining tasks suit macros? This article covers inputs, variable management and validation records, using a part-family example to organize requirements without copying programs blindly or assuming universal variable ranges.
Read article →High-speed contour machining cannot be assessed by look-ahead block count alone. Drawing on official AICC and Fine Surface descriptions, this article shows how to organize toolpath information, machining objectives and comparative tests while distinguishing function support from actual results.
Read article →TCP coordinates the intended toolpath with the movement of individual machine axes. For systems configured with the function, this article explains how the program, machine kinematics, tool data and postprocessor must correspond, and highlights common selection mistakes.
Read article →Tilted Working Plane helps organize programs around inclined machining faces. Using a hypothetical angled-hole scenario, this article explains the relationships among TWP, machine orientation and workholding datums, and lists the information to check before 3+2 machining.
Read article →If a large program will not fit in the CNC, identify whether the issue concerns storage, transfer or execution. Based on official Data Server material, this article explains file-flow and selection checks, distinguishing a network connection or external storage from actual program-operation capability.
Read article →More storage does not solve every program-saving or editing problem. This article distinguishes program space, registered program count, background editing and extended editing, and explains how to organize requirements and check the current configuration.
Read article →OPRM_INF.000 stores FANUC option information and should be retained with SRAM data and user files. Using a specified 0i-F manual edition, this article outlines backup steps and distinguishes unauthorized restoration from restoration during properly planned maintenance.
Read article →FANUC 5523 indicates that option certification is pending; 5524 indicates that the waiting period has expired. Clearing an alarm with RESET does not complete certification. This article explains the time limit, certification after file restoration and the information to prepare, using specified manufacturer manual editions.
Read article →Checks before importing CNCOPSET.TXT and the documented procedure for certain series, with an explanation of certification expiry alarm 5524 and how to assess 5527 and subsequent actions against the complete message and software version.
Read article →An overview of ten groups of FANUC functions, from program capacity and macros to high-speed contour control, multi-axis machining and assisted programming, explaining standard versus optional functions and the information needed to check model, software version and machine configuration.
Read article →A shared alarm number or feature name does not establish identical behavior across CNC series. Keep the full message, model and software revision together when comparing references.
We are an independent CNC repair service. We are not affiliated with FANUC or Mitsubishi Electric.